My favorites

Magnetic Core AL Database

Browse source-linked magnetic core AL values and dimensions, then calculate turns and review winding feasibility with the selected core.

Catalogue AL is nominal. Original documentation and application measurements are required for bias, temperature and current qualification. Missing tolerance or bias data stays unknown. Dimensions follow the source convention; coating is not always specified.

Toroid calculator →

Matching catalogue records: 6420 / 6420

ModelMaterialAL (nH/N²)OD × ID × H (mm)AL toleranceManufacturer sourceToroid calculator
Micrometals
T7-17
-17 4 μ0.61.78 × 0.89 × 0.76Not recordedManufacturer sourceCalculate with this core →
Micrometals
T7-10
-10 6 μ0.91.78 × 0.89 × 0.76Not recordedManufacturer sourceCalculate with this core →
Micrometals
T7-6
-6 8.5 μ1.31.78 × 0.89 × 0.76Not recordedManufacturer sourceCalculate with this core →
Micrometals
T7-2
-2 10 μ1.351.78 × 0.89 × 0.76Not recordedManufacturer sourceCalculate with this core →
Micrometals
T7-1
-1 20 μ3.51.78 × 0.89 × 0.76Not recordedManufacturer sourceCalculate with this core →
Micrometals
T10-0
-0 1 μ0.242.46 × 1.12 × 0.76Not recordedManufacturer sourceCalculate with this core →
Micrometals
T10-17
-17 4 μ0.52.46 × 1.12 × 0.76Not recordedManufacturer sourceCalculate with this core →
Micrometals
T10-10
-10 6 μ0.82.46 × 1.12 × 0.76Not recordedManufacturer sourceCalculate with this core →
Micrometals
T10-6
-6 8.5 μ1.152.46 × 1.12 × 0.76Not recordedManufacturer sourceCalculate with this core →
Micrometals
T10-2
-2 10 μ1.352.46 × 1.12 × 0.76Not recordedManufacturer sourceCalculate with this core →
Micrometals
T10-1
-1 20 μ3.22.46 × 1.12 × 0.76Not recordedManufacturer sourceCalculate with this core →
Micrometals
T10-3
-3 35 μ42.46 × 1.12 × 0.76Not recordedManufacturer sourceCalculate with this core →
Micrometals
T10-6T
-6 8.5 μ1.152.46 × 1.3 × 1.02Not recordedManufacturer sourceCalculate with this core →
Micrometals
T10-10B
-10 6 μ1.252.46 × 1.12 × 1.27Not recordedManufacturer sourceCalculate with this core →
Micrometals
T10-2B
-2 10 μ1.82.46 × 1.12 × 1.27Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-0A
-0 1 μ0.133.18 × 1.57 × 0.76Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-10A
-10 6 μ0.723.18 × 1.57 × 0.76Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-6A
-6 8.5 μ1.023.18 × 1.57 × 0.76Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-10B
-10 6 μ13.18 × 1.57 × 1.07Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-6B
-6 8.5 μ1.353.18 × 1.57 × 1.07Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-2B
-2 10 μ1.623.18 × 1.57 × 1.07Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-1B
-1 20 μ3.33.18 × 1.57 × 1.07Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-0
-0 1 μ0.243.18 × 1.57 × 1.27Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-17
-17 4 μ0.753.18 × 1.57 × 1.27Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-10
-10 6 μ1.23.18 × 1.57 × 1.27Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-6
-6 8.5 μ1.73.18 × 1.57 × 1.27Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-7
-7 9 μ1.83.18 × 1.57 × 1.27Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-2
-2 10 μ23.18 × 1.57 × 1.27Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-1
-1 20 μ4.83.18 × 1.57 × 1.27Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-15
-15 25 μ53.18 × 1.57 × 1.27Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-8/90
-8 35 μ63.18 × 1.57 × 1.27Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-3
-3 35 μ63.18 × 1.57 × 1.27Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-26
-26 75 μ133.18 × 1.57 × 1.27Not recordedManufacturer sourceCalculate with this core →
Micrometals
T12-45
-45 100 μ163.18 × 1.57 × 1.27Not recordedManufacturer sourceCalculate with this core →
Micrometals
T14-6
-6 8.5 μ1.263.43 × 1.7 × 1.07Not recordedManufacturer sourceCalculate with this core →
Micrometals
T14-26A
-26 75 μ12.53.43 × 1.7 × 1.52Not recordedManufacturer sourceCalculate with this core →
Micrometals
T14-52A
-52 75 μ11.53.43 × 1.7 × 1.52Not recordedManufacturer sourceCalculate with this core →
Micrometals
T14-45A
-45 100 μ16.53.43 × 1.7 × 1.52Not recordedManufacturer sourceCalculate with this core →
Micrometals
HF-014014-8
HF - Hi-Flux™ 14 μ33.56 × 1.78 × 1.52Not recordedManufacturer sourceCalculate with this core →
Micrometals
MS-014014-8
MS - Sendust 14 μ33.56 × 1.78 × 1.52Not recordedManufacturer sourceCalculate with this core →

Engineering questions

Does AL remain constant under DC bias?

No. Nominal catalogue AL does not establish loaded inductance. Use the exact material and core bias curve at the intended current and temperature. A missing curve is not a pass.

Why can 20 turns fall short of the target inductance?

N = √(L/AL) is a nominal calculation with consistent units. AL tolerance, DC bias, integer-turn rounding and winding conditions can change the achieved inductance; verify the finished winding.

Will a larger wire diameter still fit?

Check finished enamel diameter, parallel strands, inner-hole clearance and winding layers. The calculator provides a geometric estimate, not winding-process or thermal qualification.

Resources