My favorites

Magnetic Core AL Database

Browse source-linked magnetic core AL values and dimensions, then calculate turns and review winding feasibility with the selected core.

Catalogue AL is nominal. Original documentation and application measurements are required for bias, temperature and current qualification. Missing tolerance or bias data stays unknown. Dimensions follow the source convention; coating is not always specified.

Toroid calculator →

Matching catalogue records: 6420 / 6420

ModelMaterialAL (nH/N²)OD × ID × H (mm)AL toleranceManufacturer sourceToroid calculator
Micrometals
MP-141125-2
MP - MPP 125 μ11735.81 × 22.35 × 10.46Not recordedManufacturer sourceCalculate with this core →
Micrometals
OC-141125-2
OC - Optimized Core Loss 125 μ11735.81 × 22.35 × 10.46Not recordedManufacturer sourceCalculate with this core →
Micrometals
MP-141147-2
MP - MPP 147 μ13835.81 × 22.35 × 10.46Not recordedManufacturer sourceCalculate with this core →
Micrometals
HF-141147-2
HF - Hi-Flux™ 147 μ13835.81 × 22.35 × 10.46Not recordedManufacturer sourceCalculate with this core →
Micrometals
MS-141147-2
MS - Sendust 147 μ13835.81 × 22.35 × 10.46Not recordedManufacturer sourceCalculate with this core →
Micrometals
HF-141160-2
HF - Hi-Flux™ 160 μ15035.81 × 22.35 × 10.46Not recordedManufacturer sourceCalculate with this core →
Micrometals
MS-141160-2
MS - Sendust 160 μ15035.81 × 22.35 × 10.46Not recordedManufacturer sourceCalculate with this core →
Micrometals
MP-141160-2
MP - MPP 160 μ15035.81 × 22.35 × 10.46Not recordedManufacturer sourceCalculate with this core →
Micrometals
MP-141173-2
MP - MPP 173 μ16235.81 × 22.35 × 10.46Not recordedManufacturer sourceCalculate with this core →
Micrometals
MP-141205-2
MP - MPP 205 μ19235.81 × 22.35 × 10.46Not recordedManufacturer sourceCalculate with this core →
Micrometals
T141-8/90
-8 35 μ3235.94 × 22.35 × 10.46Not recordedManufacturer sourceCalculate with this core →
Micrometals
T141-40
-40 60 μ6035.94 × 22.35 × 10.46Not recordedManufacturer sourceCalculate with this core →
Micrometals
T141-26
-26 75 μ7535.94 × 22.35 × 10.46Not recordedManufacturer sourceCalculate with this core →
Micrometals
T141-52
-52 75 μ6935.94 × 22.35 × 10.46Not recordedManufacturer sourceCalculate with this core →
Micrometals
T150-26A
-26 75 μ6638.35 × 21.46 × 8.26Not recordedManufacturer sourceCalculate with this core →
Micrometals
T150-38A
-38 85 μ74.538.35 × 21.46 × 8.26Not recordedManufacturer sourceCalculate with this core →
Micrometals
T150-45A
-45 100 μ8438.35 × 21.46 × 8.26Not recordedManufacturer sourceCalculate with this core →
Micrometals
T150-6
-6 8.5 μ1038.35 × 21.46 × 11.1Not recordedManufacturer sourceCalculate with this core →
Micrometals
T150-2
-2 10 μ11.538.35 × 21.46 × 11.1Not recordedManufacturer sourceCalculate with this core →
Micrometals
T150-30
-30 22 μ2638.35 × 21.46 × 11.1Not recordedManufacturer sourceCalculate with this core →
Micrometals
T150-63
-63 35 μ4138.35 × 21.46 × 11.1Not recordedManufacturer sourceCalculate with this core →
Micrometals
T150-60
-60 55 μ6538.35 × 21.46 × 11.1Not recordedManufacturer sourceCalculate with this core →
Micrometals
T150-18
-18 55 μ6538.35 × 21.46 × 11.1Not recordedManufacturer sourceCalculate with this core →
Micrometals
T150-40
-40 60 μ7838.35 × 21.46 × 11.1Not recordedManufacturer sourceCalculate with this core →
Micrometals
T150-66
-66 66 μ7838.35 × 21.46 × 11.1Not recordedManufacturer sourceCalculate with this core →
Micrometals
T150-26
-26 75 μ9638.35 × 21.46 × 11.1Not recordedManufacturer sourceCalculate with this core →
Micrometals
T150-52
-52 75 μ8938.35 × 21.46 × 11.1Not recordedManufacturer sourceCalculate with this core →
Micrometals
T150-70
-70 100 μ11838.35 × 21.46 × 11.1Not recordedManufacturer sourceCalculate with this core →
Micrometals
T157-0
-0 1 μ1.839.88 × 24.13 × 14.48Not recordedManufacturer sourceCalculate with this core →
Micrometals
T157-17
-17 4 μ5.339.88 × 24.13 × 14.48Not recordedManufacturer sourceCalculate with this core →
Micrometals
T157-5
-5 5 μ6.639.88 × 24.13 × 14.48Not recordedManufacturer sourceCalculate with this core →
Micrometals
T157-10
-10 6 μ8.239.88 × 24.13 × 14.48Not recordedManufacturer sourceCalculate with this core →
Micrometals
T157-6
-6 8.5 μ11.539.88 × 24.13 × 14.48Not recordedManufacturer sourceCalculate with this core →
Micrometals
T157-7
-7 9 μ1239.88 × 24.13 × 14.48Not recordedManufacturer sourceCalculate with this core →
Micrometals
T157-2
-2 10 μ1439.88 × 24.13 × 14.48Not recordedManufacturer sourceCalculate with this core →
Micrometals
T157-14
-14 14 μ17.539.88 × 24.13 × 14.48Not recordedManufacturer sourceCalculate with this core →
Micrometals
T157-1
-1 20 μ3239.88 × 24.13 × 14.48Not recordedManufacturer sourceCalculate with this core →
Micrometals
T157-30
-30 22 μ31.539.88 × 24.13 × 14.48Not recordedManufacturer sourceCalculate with this core →
Micrometals
T157-15
-15 25 μ3639.88 × 24.13 × 14.48Not recordedManufacturer sourceCalculate with this core →
Micrometals
T157-35
-35 33 μ43.539.88 × 24.13 × 14.48Not recordedManufacturer sourceCalculate with this core →

Engineering questions

Does AL remain constant under DC bias?

No. Nominal catalogue AL does not establish loaded inductance. Use the exact material and core bias curve at the intended current and temperature. A missing curve is not a pass.

Why can 20 turns fall short of the target inductance?

N = √(L/AL) is a nominal calculation with consistent units. AL tolerance, DC bias, integer-turn rounding and winding conditions can change the achieved inductance; verify the finished winding.

Will a larger wire diameter still fit?

Check finished enamel diameter, parallel strands, inner-hole clearance and winding layers. The calculator provides a geometric estimate, not winding-process or thermal qualification.

Resources